Payne® – 95% AFUE 60000 Btuh ECM Condensing Gas Furnace


Add Installation ( FREE )


Add-ons total:


Free Shipping / Installation Within 2 Business Days


Product Description


Payne® – 95% AFUE 60000 Btuh ECM Condensing Gas Furnace

The PG95ESAA Multipoise Condensing Gas Furnace features a single-stage gas valve and a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.0% this furnace provides added savings over standard gas furnaces. It features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.


  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.


  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35″ (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Two-pipe venting, single-pipe venting or ventilated combustion air.


  • Approved for Twinning applications with accessory kit (42060B through 60100C models, only).
  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040A through 66120D models, only).
  • Propane convertible with gas conversion accessory kit.


  • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement


Weight 164.4 Pounds (lbs)
Width 17.5 Inches (In)
Height 35 Inches (In)
Country of Origin USA
Length 29.5 Inches (In)
AFUE 95%,96%
Air Flow Multi-Position
Blower Motor HP 3/4 HP
Blower Motor RPM 400-1200
Blower Motor Speeds 5 (Five)
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel 11″ x 8″
Brand Payne
BTU Input 60000
BTU Output 58000
CFM 1010
Circuit Breaker – Max Amps 15
Color Gray
Cycle/Hertz 60 Hz
Energy Star Rated Yes
ETL Listed No
FER Compliant Yes
Fuel Type Natural Gas or LP
Full Load Amps 8.8
Gas Connection 1/2″ [12.7 mm] N.P.T.
Ignition Type Silicon Nitride
Includes Filter Rack No
Phase Single
Product Family PG95ESA
Prop 65 Yes
Stage Single
UL Listed No
Voltage 115 VAC
Warranty Offered Yes

Additional information

House Size



Specification Sheet – English



There are no reviews yet.

Be the first to review “Payne® – 95% AFUE 60000 Btuh ECM Condensing Gas Furnace”

Your email address will not be published. Required fields are marked *